The AV over IP 4K/60 Uncompressed Extender, UTP (500760) sends HDMI and DisplayPort video signals at resolutions up to 4K@60Hz to nearly unlimited destinations via an Ethernet switch, depending on system bandwidth. Integrators can create 4K video walls, virtual matrix switch and splitter configurations supporting potentially hundreds of displays, using one receiver for each display. Equipment on both sender and receiver sides can be connected up to 100 meters from the 10Gig Ethernet switch via Cat5e/6 cable for added convenience. Two-channel audio can also be embedded (TX) and extracted (RX).
"MuxLab continues to work hard to deliver leading edge technology, in order to offer our customers solutions for any AV application, be it sending 4K/60 video uncompressed for the purest form of video transmission, or sending 4K/60 video with H.264/H.265 compression to be able to transmit signals across the globe, MuxLab has you covered," said Joe Teixeira, Director Product Management at MuxLab.
The HDMI over IP H.264/H.265 PoE (500762) sends HDMI up to 100 meters supporting resolutions up to 4K@60Hz using Cat5e/6 cable in a point-to-point configuration. When connected to a local Ethernet network, point-to-multipoint and multipoint-to-multipoint configurations are established in a low bandwidth, expandable and cost effective manner, untethering the system from dedicated cabling.