Datasat visits Prometheus Cinema to analyse Auro/Atmos conversion

Social Site Sharing Tool



Datasat visits Prometheus Cinema to analyse Auro/Atmos conversion Author Topic: Datasat visits Prometheus Cinema to analyse Auro/Atmos conversion  (Read 5930 times)

0 Members and 1 Guest are viewing this topic.

Offline Peter CINERAMAX

The Carl Fischer Estate in Miami beach home of Prometheus
Datasat Visits Prometheus cinema to discuss Auro and YES! Atmos upgrade plan.
A Picasso Lithograph on the elevator to the cinema.

Linkback: http://dci-forum.com/d-cinema-home/11/datasat-visits-prometheus-cinema-analyse-auroatmos-conversion/96/

Offline Peter CINERAMAX

Datasat visits Prometheus Cinema to analyse Auro/Atmos conversion
Re: Datasat visits Prometheus Cinema to analyse Auro/Atmos conversion
« Reply #1 on: Thu July 17, 2014, 03:56:54 PM »
[media=youtube]-K_DYE3SUWU[/media]

Offline Peter CINERAMAX

Datasat visits Prometheus Cinema to analyse Auro/Atmos conversion
Re: Datasat visits Prometheus Cinema to analyse Auro/Atmos conversion
« Reply #2 on: Thu July 17, 2014, 04:04:49 PM »
We will post shop drawings and plan to replace (add on)  slightly worn out Dynaudio confidence with custom Questeds. In addition we will investigate a Laser 4k upgrade both DCI RGB and phosphor variety.

Offline MrPixels

Datasat visits Prometheus Cinema to analyse Auro/Atmos conversion
Re: Datasat visits Prometheus Cinema to analyse Auro/Atmos conversion
« Reply #3 on: Fri July 18, 2014, 12:45:22 PM »
Looks good Peter.

Offline Peter CINERAMAX

Datasat visits Prometheus Cinema to analyse Auro/Atmos conversion
Re: Datasat visits Prometheus Cinema to analyse Auro/Atmos conversion
« Reply #4 on: Thu August 28, 2014, 08:13:57 PM »
Two important news for the datasat: auro is out and it is considered Outstanding better than 7.1 auro can be applied to cinema content too. But Home Atmos is also coming out, yet the most exciting is compatibility with new d-box controller ( i will post this weekend my 1 million $ datasat/d-box/ dci discovery).
« Last Edit: Thu August 28, 2014, 08:17:10 PM by Peter CINERAMAX »

Offline Peter CINERAMAX

Datasat visits Prometheus Cinema to analyse Auro/Atmos conversion
Re: Datasat visits Prometheus Cinema again to time align
« Reply #5 on: Wed July 22, 2015, 06:47:38 PM »
Here is some History of the Prometheus house named shadows....

http://miami.curbed.com/archives/2013/01/28/carl-fisher-shadows.php

Tomorrow we will be visiting to upgrade firmware and time align and show Mike Smith of Datasat for immersive audio future upgrade planning.

Datasat has to be the best surround company in the world. No wonder Imax, and Barco use them.

Who knows If we finishh early we may pop up at Skoll and pop it's cherry with a dirac calibration.

Stay Tuned!

Offline Peter CINERAMAX

Datasat visits Prometheus Cinema to analyse Auro/Atmos conversion
Re: Datasat Fixes Prometheus suspected Architectural Flaw impact
« Reply #6 on: Fri July 24, 2015, 06:53:50 PM »




The bass always have been sloppy and laconic, but he pressure in the room sinks the middle of the room like in a time delay fashion, if you notice the target base line was hitting 200 and then he slid it back to like the 155-160 region, this fixed what all along even the top acousticians thought was a condition of the 90 year old wooden mansion.  Well Mike tighten that bass and time aligned it dead on where it sounds like a top room.

Also tightly packing the mics around one seat made a huge difference not only in that seat but the general mlp area, when those of you upgrade to dirac 2 I recommend setting a memory for just one seat.

More Detail to come with actual plots that surprised me how nice the room design works with the speakers.

At that time I was focusing on DCI Projection but apparently I had the skils to do great acoustics and select/site  great speakers to where:

You Will see the plots...
« Last Edit: Sat July 25, 2015, 08:12:44 PM by Peter CINERAMAX »

Offline Peter CINERAMAX

see pics

Offline Peter CINERAMAX

Datasat visits Prometheus Cinema to analyse Auro/Atmos conversion
Record time amazing calibration 75 minutes
« Reply #8 on: Fri July 24, 2015, 07:22:54 PM »
What this guy did to eliminate a problem we thought was a non fixable thing blew me away.


Offline Peter CINERAMAX

Datasat visits Prometheus Cinema to analyse Auro/Atmos conversion
Re: Datasat visits Prometheus Cinema to analyse Auro/Atmos conversion
« Reply #9 on: Sat July 25, 2015, 08:15:46 PM »
Those curves not only attest to the flexibility with which dynaudio confidence series sounds good no matter where placed, but as to how well they age, 7.5 years of breaking in , like wine they got better, those plots from the MLP don't lie.

And to think in 2007 people only respected my projector skills. ...

Offline Peter CINERAMAX

Datasat visits Prometheus Cinema to analyse Auro/Atmos conversion
Fabric system is easy to work with for Atmos/Dts-X/Auro Update
« Reply #10 on: Wed August 05, 2015, 02:57:49 PM »

Offline Peter CINERAMAX

Datasat visits Prometheus Cinema to analyse Auro/Atmos conversion
Succesful Test remove-replac fabric - decisional point passed to allow Upgrade
« Reply #11 on: Wed August 05, 2015, 03:41:35 PM »
This great success will allow us to add 8 speakers for atmos/dts-x/auro upgrade.

Offline Peter CINERAMAX

Datasat visits Prometheus Cinema to analyse Auro/Atmos conversion
This great success will allow us to add 8 speakers for atmos/dts-x/auro upgrade.
« Reply #12 on: Wed August 05, 2015, 03:54:29 PM »
...
« Last Edit: Wed August 05, 2015, 04:15:53 PM by Peter CINERAMAX »

Offline Peter CINERAMAX

Datasat visits Prometheus Cinema to analyse Auro/Atmos conversion
This great success will allow us to add 8 speakers for atmos/dts-x/auro upgrade.
« Reply #13 on: Wed August 05, 2015, 04:04:26 PM »
...

Offline Peter CINERAMAX

Datasat visits Prometheus Cinema to analyse Auro/Atmos conversion
This great success will allow us to add 8 speakers for atmos/dts-x/auro upgrade.
« Reply #14 on: Wed August 05, 2015, 04:06:48 PM »
...